Bypass Manager Pro

Editing: sys_darwin_arm64.s

// Copyright 2015 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.

// System calls and other sys.stuff for ARM64, Darwin
// System calls are implemented in libSystem, this file contains
// trampolines that convert from Go to C calling convention.

#include "go_asm.h"
#include "go_tls.h"
#include "textflag.h"
#include "cgo/abi_arm64.h"

#define CLOCK_REALTIME		0

TEXT notok<>(SB),NOSPLIT,$0
	MOVD	$0, R8
	MOVD	R8, (R8)
	B	0(PC)

TEXT runtime·open_trampoline(SB),NOSPLIT,$0
	SUB	$16, RSP
	MOVW	8(R0), R1	// arg 2 flags
	MOVW	12(R0), R2	// arg 3 mode
	MOVW	R2, (RSP)	// arg 3 is variadic, pass on stack
	MOVD	0(R0), R0	// arg 1 pathname
	BL	libc_open(SB)
	ADD	$16, RSP
	RET

TEXT runtime·close_trampoline(SB),NOSPLIT,$0
	MOVW	0(R0), R0	// arg 1 fd
	BL	libc_close(SB)
	RET

TEXT runtime·write_trampoline(SB),NOSPLIT,$0
	MOVD	8(R0), R1	// arg 2 buf
	MOVW	16(R0), R2	// arg 3 count
	MOVW	0(R0), R0	// arg 1 fd
	BL	libc_write(SB)
	MOVD	$-1, R1
	CMP	R0, R1
	BNE	noerr
	BL	libc_error(SB)
	MOVW	(R0), R0
	NEG	R0, R0		// caller expects negative errno value
noerr:
	RET

TEXT runtime·read_trampoline(SB),NOSPLIT,$0
	MOVD	8(R0), R1	// arg 2 buf
	MOVW	16(R0), R2	// arg 3 count
	MOVW	0(R0), R0	// arg 1 fd
	BL	libc_read(SB)
	MOVD	$-1, R1
	CMP	R0, R1
	BNE	noerr
	BL	libc_error(SB)
	MOVW	(R0), R0
	NEG	R0, R0		// caller expects negative errno value
noerr:
	RET

TEXT runtime·pipe_trampoline(SB),NOSPLIT,$0
	BL	libc_pipe(SB)	// pointer already in R0
	CMP	$0, R0
	BEQ	3(PC)
	BL	libc_error(SB)	// return negative errno value
	NEG	R0, R0
	RET

TEXT runtime·exit_trampoline(SB),NOSPLIT|NOFRAME,$0
	MOVW	0(R0), R0
	BL	libc_exit(SB)
	MOVD	$1234, R0
	MOVD	$1002, R1
	MOVD	R0, (R1)	// fail hard

TEXT runtime·raiseproc_trampoline(SB),NOSPLIT,$0
	MOVD	0(R0), R19	// signal
	BL	libc_getpid(SB)
	// arg 1 pid already in R0 from getpid
	MOVD	R19, R1	// arg 2 signal
	BL	libc_kill(SB)
	RET

TEXT runtime·mmap_trampoline(SB),NOSPLIT,$0
	MOVD	R0, R19
	MOVD	0(R19), R0	// arg 1 addr
	MOVD	8(R19), R1	// arg 2 len
	MOVW	16(R19), R2	// arg 3 prot
	MOVW	20(R19), R3	// arg 4 flags
	MOVW	24(R19), R4	// arg 5 fd
	MOVW	28(R19), R5	// arg 6 off
	BL	libc_mmap(SB)
	MOVD	$0, R1
	MOVD	$-1, R2
	CMP	R0, R2
	BNE	ok
	BL	libc_error(SB)
	MOVW	(R0), R1
	MOVD	$0, R0
ok:
	MOVD	R0, 32(R19) // ret 1 p
	MOVD	R1, 40(R19)	// ret 2 err
	RET

TEXT runtime·munmap_trampoline(SB),NOSPLIT,$0
	MOVD	8(R0), R1	// arg 2 len
	MOVD	0(R0), R0	// arg 1 addr
	BL	libc_munmap(SB)
	CMP	$0, R0
	BEQ	2(PC)
	BL	notok<>(SB)
	RET

TEXT runtime·madvise_trampoline(SB),NOSPLIT,$0
	MOVD	8(R0), R1	// arg 2 len
	MOVW	16(R0), R2	// arg 3 advice
	MOVD	0(R0), R0	// arg 1 addr
	BL	libc_madvise(SB)
	RET

TEXT runtime·mlock_trampoline(SB),NOSPLIT,$0
	MOVD	8(R0), R1	// arg 2 len
	MOVD	0(R0), R0	// arg 1 addr
	BL	libc_mlock(SB)
	RET

TEXT runtime·setitimer_trampoline(SB),NOSPLIT,$0
	MOVD	8(R0), R1	// arg 2 new
	MOVD	16(R0), R2	// arg 3 old
	MOVW	0(R0), R0	// arg 1 which
	BL	libc_setitimer(SB)
	RET

TEXT runtime·walltime_trampoline(SB),NOSPLIT,$0
	MOVD	R0, R1			// arg 2 timespec
	MOVW	$CLOCK_REALTIME, R0 	// arg 1 clock_id
	BL	libc_clock_gettime(SB)
	RET

GLOBL timebase<>(SB),NOPTR,$(machTimebaseInfo__size)

TEXT runtime·nanotime_trampoline(SB),NOSPLIT,$40
	MOVD	R0, R19
	BL	libc_mach_absolute_time(SB)
	MOVD	R0, 0(R19)
	MOVW	timebase<>+machTimebaseInfo_numer(SB), R20
	MOVD	$timebase<>+machTimebaseInfo_denom(SB), R21
	LDARW	(R21), R21	// atomic read
	CMP	$0, R21
	BNE	initialized

SUB	$(machTimebaseInfo__size+15)/16*16, RSP
	MOVD	RSP, R0
	BL	libc_mach_timebase_info(SB)
	MOVW	machTimebaseInfo_numer(RSP), R20
	MOVW	machTimebaseInfo_denom(RSP), R21
	ADD	$(machTimebaseInfo__size+15)/16*16, RSP

MOVW	R20, timebase<>+machTimebaseInfo_numer(SB)
	MOVD	$timebase<>+machTimebaseInfo_denom(SB), R22
	STLRW	R21, (R22)	// atomic write

initialized:
	MOVW	R20, 8(R19)
	MOVW	R21, 12(R19)
	RET

TEXT runtime·sigfwd(SB),NOSPLIT,$0-32
	MOVW	sig+8(FP), R0
	MOVD	info+16(FP), R1
	MOVD	ctx+24(FP), R2
	MOVD	fn+0(FP), R11
	BL	(R11)
	RET

TEXT runtime·sigtramp(SB),NOSPLIT|TOPFRAME,$176
	// Save callee-save registers in the case of signal forwarding.
	// Please refer to https://golang.org/issue/31827 .
	SAVE_R19_TO_R28(8*4)
	SAVE_F8_TO_F15(8*14)

// Save arguments.
	MOVW	R0, (8*1)(RSP)	// sig
	MOVD	R1, (8*2)(RSP)	// info
	MOVD	R2, (8*3)(RSP)	// ctx

// this might be called in external code context,
	// where g is not set.
	BL	runtime·load_g(SB)

#ifdef GOOS_ios
	MOVD	RSP, R6
	CMP	$0, g
	BEQ	nog
	// iOS always use the main stack to run the signal handler.
	// We need to switch to gsignal ourselves.
	MOVD	g_m(g), R11
	MOVD	m_gsignal(R11), R5
	MOVD	(g_stack+stack_hi)(R5), R6

nog:
	// Restore arguments.
	MOVW	(8*1)(RSP), R0
	MOVD	(8*2)(RSP), R1
	MOVD	(8*3)(RSP), R2

// Reserve space for args and the stack pointer on the
	// gsignal stack.
	SUB	$48, R6
	// Save stack pointer.
	MOVD	RSP, R4
	MOVD	R4, (8*4)(R6)
	// Switch to gsignal stack.
	MOVD	R6, RSP

// Save arguments.
	MOVW	R0, (8*1)(RSP)
	MOVD	R1, (8*2)(RSP)
	MOVD	R2, (8*3)(RSP)
#endif

// Call sigtrampgo.
	MOVD	$runtime·sigtrampgo(SB), R11
	BL	(R11)

#ifdef GOOS_ios
	// Switch to old stack.
	MOVD	(8*4)(RSP), R5
	MOVD	R5, RSP
#endif

// Restore callee-save registers.
	RESTORE_R19_TO_R28(8*4)
	RESTORE_F8_TO_F15(8*14)

RET

TEXT runtime·cgoSigtramp(SB),NOSPLIT,$0
	JMP	runtime·sigtramp(SB)

TEXT runtime·sigprocmask_trampoline(SB),NOSPLIT,$0
	MOVD	8(R0), R1	// arg 2 new
	MOVD	16(R0), R2	// arg 3 old
	MOVW	0(R0), R0	// arg 1 how
	BL	libc_pthread_sigmask(SB)
	CMP	$0, R0
	BEQ	2(PC)
	BL	notok<>(SB)
	RET

TEXT runtime·sigaction_trampoline(SB),NOSPLIT,$0
	MOVD	8(R0), R1	// arg 2 new
	MOVD	16(R0), R2	// arg 3 old
	MOVW	0(R0), R0	// arg 1 how
	BL	libc_sigaction(SB)
	CMP	$0, R0
	BEQ	2(PC)
	BL	notok<>(SB)
	RET

TEXT runtime·usleep_trampoline(SB),NOSPLIT,$0
	MOVW	0(R0), R0	// arg 1 usec
	BL	libc_usleep(SB)
	RET

TEXT runtime·sysctl_trampoline(SB),NOSPLIT,$0
	MOVW	8(R0), R1	// arg 2 miblen
	MOVD	16(R0), R2	// arg 3 oldp
	MOVD	24(R0), R3	// arg 4 oldlenp
	MOVD	32(R0), R4	// arg 5 newp
	MOVD	40(R0), R5	// arg 6 newlen
	MOVD	0(R0), R0	// arg 1 mib
	BL	libc_sysctl(SB)
	RET

TEXT runtime·sysctlbyname_trampoline(SB),NOSPLIT,$0
	MOVD	8(R0), R1	// arg 2 oldp
	MOVD	16(R0), R2	// arg 3 oldlenp
	MOVD	24(R0), R3	// arg 4 newp
	MOVD	32(R0), R4	// arg 5 newlen
	MOVD	0(R0), R0	// arg 1 name
	BL	libc_sysctlbyname(SB)
	RET

TEXT runtime·kqueue_trampoline(SB),NOSPLIT,$0
	BL	libc_kqueue(SB)
	RET

TEXT runtime·kevent_trampoline(SB),NOSPLIT,$0
	MOVD	8(R0), R1	// arg 2 keventt
	MOVW	16(R0), R2	// arg 3 nch
	MOVD	24(R0), R3	// arg 4 ev
	MOVW	32(R0), R4	// arg 5 nev
	MOVD	40(R0), R5	// arg 6 ts
	MOVW	0(R0), R0	// arg 1 kq
	BL	libc_kevent(SB)
	MOVD	$-1, R2
	CMP	R0, R2
	BNE	ok
	BL	libc_error(SB)
	MOVW	(R0), R0	// errno
	NEG	R0, R0	// caller wants it as a negative error code
ok:
	RET

TEXT runtime·fcntl_trampoline(SB),NOSPLIT,$0
	SUB	$16, RSP
	MOVD	R0, R19
	MOVW	0(R19), R0	// arg 1 fd
	MOVW	4(R19), R1	// arg 2 cmd
	MOVW	8(R19), R2	// arg 3 arg
	MOVW	R2, (RSP)	// arg 3 is variadic, pass on stack
	BL	libc_fcntl(SB)
	MOVD	$0, R1
	MOVD	$-1, R2
	CMP	R0, R2
	BNE	noerr
	BL	libc_error(SB)
	MOVW	(R0), R1
	MOVW	$-1, R0
noerr:
	MOVW	R0, 12(R19)
	MOVW	R1, 16(R19)
	ADD	$16, RSP
	RET

TEXT runtime·sigaltstack_trampoline(SB),NOSPLIT,$0
#ifdef GOOS_ios
	// sigaltstack on iOS is not supported and will always
	// run the signal handler on the main stack, so our sigtramp has
	// to do the stack switch ourselves.
	MOVW	$43, R0
	BL	libc_exit(SB)
#else
	MOVD	8(R0), R1		// arg 2 old
	MOVD	0(R0), R0		// arg 1 new
	CALL	libc_sigaltstack(SB)
	CBZ	R0, 2(PC)
	BL	notok<>(SB)
#endif
	RET

// Thread related functions

// mstart_stub is the first function executed on a new thread started by pthread_create.
// It just does some low-level setup and then calls mstart.
// Note: called with the C calling convention.
TEXT runtime·mstart_stub(SB),NOSPLIT,$160
	// R0 points to the m.
	// We are already on m's g0 stack.

// Save callee-save registers.
	SAVE_R19_TO_R28(8)
	SAVE_F8_TO_F15(88)

MOVD	m_g0(R0), g
	BL	·save_g(SB)

BL	runtime·mstart(SB)

// Restore callee-save registers.
	RESTORE_R19_TO_R28(8)
	RESTORE_F8_TO_F15(88)

// Go is all done with this OS thread.
	// Tell pthread everything is ok (we never join with this thread, so
	// the value here doesn't really matter).
	MOVD	$0, R0

RET

TEXT runtime·pthread_attr_init_trampoline(SB),NOSPLIT,$0
	MOVD	0(R0), R0	// arg 1 attr
	BL	libc_pthread_attr_init(SB)
	RET

TEXT runtime·pthread_attr_getstacksize_trampoline(SB),NOSPLIT,$0
	MOVD	8(R0), R1	// arg 2 size
	MOVD	0(R0), R0	// arg 1 attr
	BL	libc_pthread_attr_getstacksize(SB)
	RET

TEXT runtime·pthread_attr_setdetachstate_trampoline(SB),NOSPLIT,$0
	MOVD	8(R0), R1	// arg 2 state
	MOVD	0(R0), R0	// arg 1 attr
	BL	libc_pthread_attr_setdetachstate(SB)
	RET

TEXT runtime·pthread_create_trampoline(SB),NOSPLIT,$0
	SUB	$16, RSP
	MOVD	0(R0), R1	// arg 2 state
	MOVD	8(R0), R2	// arg 3 start
	MOVD	16(R0), R3	// arg 4 arg
	MOVD	RSP, R0 	// arg 1 &threadid (which we throw away)
	BL	libc_pthread_create(SB)
	ADD	$16, RSP
	RET

TEXT runtime·raise_trampoline(SB),NOSPLIT,$0
	MOVW	0(R0), R0	// arg 1 sig
	BL	libc_raise(SB)
	RET

TEXT runtime·pthread_mutex_init_trampoline(SB),NOSPLIT,$0
	MOVD	8(R0), R1	// arg 2 attr
	MOVD	0(R0), R0	// arg 1 mutex
	BL	libc_pthread_mutex_init(SB)
	RET

TEXT runtime·pthread_mutex_lock_trampoline(SB),NOSPLIT,$0
	MOVD	0(R0), R0	// arg 1 mutex
	BL	libc_pthread_mutex_lock(SB)
	RET

TEXT runtime·pthread_mutex_unlock_trampoline(SB),NOSPLIT,$0
	MOVD	0(R0), R0	// arg 1 mutex
	BL	libc_pthread_mutex_unlock(SB)
	RET

TEXT runtime·pthread_cond_init_trampoline(SB),NOSPLIT,$0
	MOVD	8(R0), R1	// arg 2 attr
	MOVD	0(R0), R0	// arg 1 cond
	BL	libc_pthread_cond_init(SB)
	RET

TEXT runtime·pthread_cond_wait_trampoline(SB),NOSPLIT,$0
	MOVD	8(R0), R1	// arg 2 mutex
	MOVD	0(R0), R0	// arg 1 cond
	BL	libc_pthread_cond_wait(SB)
	RET

TEXT runtime·pthread_cond_timedwait_relative_np_trampoline(SB),NOSPLIT,$0
	MOVD	8(R0), R1	// arg 2 mutex
	MOVD	16(R0), R2	// arg 3 timeout
	MOVD	0(R0), R0	// arg 1 cond
	BL	libc_pthread_cond_timedwait_relative_np(SB)
	RET

TEXT runtime·pthread_cond_signal_trampoline(SB),NOSPLIT,$0
	MOVD	0(R0), R0	// arg 1 cond
	BL	libc_pthread_cond_signal(SB)
	RET

TEXT runtime·pthread_self_trampoline(SB),NOSPLIT,$0
	MOVD	R0, R19		// R19 is callee-save
	BL	libc_pthread_self(SB)
	MOVD	R0, 0(R19)	// return value
	RET

TEXT runtime·pthread_kill_trampoline(SB),NOSPLIT,$0
	MOVD	8(R0), R1	// arg 2 sig
	MOVD	0(R0), R0	// arg 1 thread
	BL	libc_pthread_kill(SB)
	RET

TEXT runtime·pthread_key_create_trampoline(SB),NOSPLIT,$0
	MOVD	8(R0), R1	// arg 2 destructor
	MOVD	0(R0), R0	// arg 1 *key
	BL	libc_pthread_key_create(SB)
	RET

TEXT runtime·pthread_setspecific_trampoline(SB),NOSPLIT,$0
	MOVD	8(R0), R1	// arg 2 value
	MOVD	0(R0), R0	// arg 1 key
	BL	libc_pthread_setspecific(SB)
	RET

TEXT runtime·osinit_hack_trampoline(SB),NOSPLIT,$0
	MOVD	$0, R0	// arg 1 val
	BL	libc_notify_is_valid_token(SB)
	BL	libc_xpc_date_create_from_current(SB)
	RET

// syscall calls a function in libc on behalf of the syscall package.
// syscall takes a pointer to a struct like:
// struct {
//	fn    uintptr
//	a1    uintptr
//	a2    uintptr
//	a3    uintptr
//	r1    uintptr
//	r2    uintptr
//	err   uintptr
// }
// syscall must be called on the g0 stack with the
// C calling convention (use libcCall).
TEXT runtime·syscall(SB),NOSPLIT,$0
	SUB	$16, RSP	// push structure pointer
	MOVD	R0, 8(RSP)

MOVD	0(R0), R12	// fn
	MOVD	16(R0), R1	// a2
	MOVD	24(R0), R2	// a3
	MOVD	8(R0), R0	// a1

// If fn is declared as vararg, we have to pass the vararg arguments on the stack.
	// (Because ios decided not to adhere to the standard arm64 calling convention, sigh...)
	// The only libSystem calls we support that are vararg are open, fcntl, and ioctl,
	// which are all of the form fn(x, y, ...). So we just need to put the 3rd arg
	// on the stack as well.
	// If we ever have other vararg libSystem calls, we might need to handle more cases.
	MOVD	R2, (RSP)

BL	(R12)

MOVD	8(RSP), R2	// pop structure pointer
	ADD	$16, RSP
	MOVD	R0, 32(R2)	// save r1
	MOVD	R1, 40(R2)	// save r2
	CMPW	$-1, R0
	BNE	ok
	SUB	$16, RSP	// push structure pointer
	MOVD	R2, 8(RSP)
	BL	libc_error(SB)
	MOVW	(R0), R0
	MOVD	8(RSP), R2	// pop structure pointer
	ADD	$16, RSP
	MOVD	R0, 48(R2)	// save err
ok:
	RET

// syscallX calls a function in libc on behalf of the syscall package.
// syscallX takes a pointer to a struct like:
// struct {
//	fn    uintptr
//	a1    uintptr
//	a2    uintptr
//	a3    uintptr
//	r1    uintptr
//	r2    uintptr
//	err   uintptr
// }
// syscallX must be called on the g0 stack with the
// C calling convention (use libcCall).
TEXT runtime·syscallX(SB),NOSPLIT,$0
	SUB	$16, RSP	// push structure pointer
	MOVD	R0, (RSP)

MOVD	0(R0), R12	// fn
	MOVD	16(R0), R1	// a2
	MOVD	24(R0), R2	// a3
	MOVD	8(R0), R0	// a1
	BL	(R12)

MOVD	(RSP), R2	// pop structure pointer
	ADD	$16, RSP
	MOVD	R0, 32(R2)	// save r1
	MOVD	R1, 40(R2)	// save r2
	CMP	$-1, R0
	BNE	ok
	SUB	$16, RSP	// push structure pointer
	MOVD	R2, (RSP)
	BL	libc_error(SB)
	MOVW	(R0), R0
	MOVD	(RSP), R2	// pop structure pointer
	ADD	$16, RSP
	MOVD	R0, 48(R2)	// save err
ok:
	RET

// syscallPtr is like syscallX except that the libc function reports an
// error by returning NULL and setting errno.
TEXT runtime·syscallPtr(SB),NOSPLIT,$0
	SUB	$16, RSP	// push structure pointer
	MOVD	R0, (RSP)

MOVD	0(R0), R12	// fn
	MOVD	16(R0), R1	// a2
	MOVD	24(R0), R2	// a3
	MOVD	8(R0), R0	// a1
	BL	(R12)

MOVD	(RSP), R2	// pop structure pointer
	ADD	$16, RSP
	MOVD	R0, 32(R2)	// save r1
	MOVD	R1, 40(R2)	// save r2
	CMP	$0, R0
	BNE	ok
	SUB	$16, RSP	// push structure pointer
	MOVD	R2, (RSP)
	BL	libc_error(SB)
	MOVW	(R0), R0
	MOVD	(RSP), R2	// pop structure pointer
	ADD	$16, RSP
	MOVD	R0, 48(R2)	// save err
ok:
	RET

// syscall6 calls a function in libc on behalf of the syscall package.
// syscall6 takes a pointer to a struct like:
// struct {
//	fn    uintptr
//	a1    uintptr
//	a2    uintptr
//	a3    uintptr
//	a4    uintptr
//	a5    uintptr
//	a6    uintptr
//	r1    uintptr
//	r2    uintptr
//	err   uintptr
// }
// syscall6 must be called on the g0 stack with the
// C calling convention (use libcCall).
TEXT runtime·syscall6(SB),NOSPLIT,$0
	SUB	$16, RSP	// push structure pointer
	MOVD	R0, 8(RSP)

MOVD	0(R0), R12	// fn
	MOVD	16(R0), R1	// a2
	MOVD	24(R0), R2	// a3
	MOVD	32(R0), R3	// a4
	MOVD	40(R0), R4	// a5
	MOVD	48(R0), R5	// a6
	MOVD	8(R0), R0	// a1

// If fn is declared as vararg, we have to pass the vararg arguments on the stack.
	// See syscall above. The only function this applies to is openat, for which the 4th
	// arg must be on the stack.
	MOVD	R3, (RSP)

BL	(R12)

MOVD	8(RSP), R2	// pop structure pointer
	ADD	$16, RSP
	MOVD	R0, 56(R2)	// save r1
	MOVD	R1, 64(R2)	// save r2
	CMPW	$-1, R0
	BNE	ok
	SUB	$16, RSP	// push structure pointer
	MOVD	R2, 8(RSP)
	BL	libc_error(SB)
	MOVW	(R0), R0
	MOVD	8(RSP), R2	// pop structure pointer
	ADD	$16, RSP
	MOVD	R0, 72(R2)	// save err
ok:
	RET

// syscall6X calls a function in libc on behalf of the syscall package.
// syscall6X takes a pointer to a struct like:
// struct {
//	fn    uintptr
//	a1    uintptr
//	a2    uintptr
//	a3    uintptr
//	a4    uintptr
//	a5    uintptr
//	a6    uintptr
//	r1    uintptr
//	r2    uintptr
//	err   uintptr
// }
// syscall6X must be called on the g0 stack with the
// C calling convention (use libcCall).
TEXT runtime·syscall6X(SB),NOSPLIT,$0
	SUB	$16, RSP	// push structure pointer
	MOVD	R0, (RSP)

MOVD	0(R0), R12	// fn
	MOVD	16(R0), R1	// a2
	MOVD	24(R0), R2	// a3
	MOVD	32(R0), R3	// a4
	MOVD	40(R0), R4	// a5
	MOVD	48(R0), R5	// a6
	MOVD	8(R0), R0	// a1
	BL	(R12)

MOVD	(RSP), R2	// pop structure pointer
	ADD	$16, RSP
	MOVD	R0, 56(R2)	// save r1
	MOVD	R1, 64(R2)	// save r2
	CMP	$-1, R0
	BNE	ok
	SUB	$16, RSP	// push structure pointer
	MOVD	R2, (RSP)
	BL	libc_error(SB)
	MOVW	(R0), R0
	MOVD	(RSP), R2	// pop structure pointer
	ADD	$16, RSP
	MOVD	R0, 72(R2)	// save err
ok:
	RET

// syscall9 calls a function in libc on behalf of the syscall package.
// syscall9 takes a pointer to a struct like:
// struct {
//	fn    uintptr
//	a1    uintptr
//	a2    uintptr
//	a3    uintptr
//	a4    uintptr
//	a5    uintptr
//	a6    uintptr
//	a7    uintptr
//	a8    uintptr
//	a9    uintptr
//	r1    uintptr
//	r2    uintptr
//	err   uintptr
// }
// syscall9 must be called on the g0 stack with the
// C calling convention (use libcCall).
TEXT runtime·syscall9(SB),NOSPLIT,$0
	SUB	$16, RSP	// push structure pointer
	MOVD	R0, 8(RSP)

MOVD	0(R0), R12	// fn
	MOVD	16(R0), R1	// a2
	MOVD	24(R0), R2	// a3
	MOVD	32(R0), R3	// a4
	MOVD	40(R0), R4	// a5
	MOVD	48(R0), R5	// a6
	MOVD	56(R0), R6	// a7
	MOVD	64(R0), R7	// a8
	MOVD	72(R0), R8	// a9
	MOVD	8(R0), R0	// a1

BL	(R12)

MOVD	8(RSP), R2	// pop structure pointer
	ADD	$16, RSP
	MOVD	R0, 80(R2)	// save r1
	MOVD	R1, 88(R2)	// save r2
	CMPW	$-1, R0
	BNE	ok
	SUB	$16, RSP	// push structure pointer
	MOVD	R2, 8(RSP)
	BL	libc_error(SB)
	MOVW	(R0), R0
	MOVD	8(RSP), R2	// pop structure pointer
	ADD	$16, RSP
	MOVD	R0, 96(R2)	// save err
ok:
	RET

// syscall_x509 is for crypto/x509. It is like syscall6 but does not check for errors,
// takes 5 uintptrs and 1 float64, and only returns one value,
// for use with standard C ABI functions.
TEXT runtime·syscall_x509(SB),NOSPLIT,$0
	SUB	$16, RSP	// push structure pointer
	MOVD	R0, (RSP)

MOVD	0(R0), R12	// fn
	MOVD	16(R0), R1	// a2
	MOVD	24(R0), R2	// a3
	MOVD	32(R0), R3	// a4
	MOVD	40(R0), R4	// a5
	FMOVD	48(R0), F0	// f1
	MOVD	8(R0), R0	// a1
	BL	(R12)

MOVD	(RSP), R2	// pop structure pointer
	ADD	$16, RSP
	MOVD	R0, 56(R2)	// save r1
	RET

TEXT runtime·issetugid_trampoline(SB),NOSPLIT,$0
	BL	libc_issetugid(SB)
	RET

// mach_vm_region_trampoline calls mach_vm_region from libc.
TEXT runtime·mach_vm_region_trampoline(SB),NOSPLIT,$0
	MOVD	0(R0), R1	// address
	MOVD	8(R0), R2	// size
	MOVW	16(R0), R3	// flavor
	MOVD	24(R0), R4	// info
	MOVD	32(R0), R5	// count
	MOVD	40(R0), R6  // object_name
	MOVD	$libc_mach_task_self_(SB), R0
	MOVW	0(R0), R0
	BL	libc_mach_vm_region(SB)
	RET

// proc_regionfilename_trampoline calls proc_regionfilename for
// the current process.
TEXT runtime·proc_regionfilename_trampoline(SB),NOSPLIT,$0
	MOVD	8(R0), R1	// address
	MOVD	16(R0), R2	// buffer
	MOVD	24(R0), R3	// buffer_size
	MOVD	0(R0), R0 // pid
	BL	libc_proc_regionfilename(SB)
	RET

BATAL